We're the AC experts. But don't take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Elkins Park, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Elkins Park, PA
Our Reviews by City
Great technician
Cheryl - Elkins Park, PA 19027
Technician came in time for scheduled appt was friendly when entering, immediately stated he would be wearing booties. Went to heater with equipment needed and began to work He offered a few tips for longevity of use and left a new filter as the one in use was new
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Cheryl, everyone at Chud appreciates it!
Dryer Vent
Aaron - Elkins Park, PA 19027
Response from Chud Air Conditioning & Heating:
Aaron & Dawn, thank you for leaving Chud a 5 star review!
Great Service
Aaron - Elkins Park, PA 19027
Very knowledgeable...explained everything in detail.
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Aaron.
Fast and great service
Pete - Elkins Park, PA 19027
I appreciate Chud and its outstanding team - they provide fast, high quality, friendly and reliable service at fair prices! I’m a very satisfied repeat customer. Highly recommend!
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Peter. It truly means a lot to the Chud team!
Thanks for excellent work!
PinEP - Elkins Park, PA 19027
Grateful for outstanding professional work! I appreciate being treated with courtesy and as a valued customer, and am delighted to be able to rely on Chud and its A+ team!
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Peter, everyone at Chud appreciates it!
Fast, helpful and competent service
Jeff - Elkins Park, PA 19027
We had a heater isn’t issue and called Chud for service. Jeff provided service the same day. As in the past, he was knowledgeable and easy to work with. Thanks again!
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Jeff, everyone at Chud appreciates it!
Artistic work.
Lenny - Elkins Park, PA 19027
Every detail of Matt and John's work was artistic. Fabrication, connections, fitings are all beautifully done. Installation was timely, clean and efficient.
Response from Chud Air Conditioning & Heating:
Lenny, we’ll make sure to pass your kind words along to John & Matt, who we know will be delighted to read your comments.
Professional
Lenny - Elkins Park, PA 19027
Paul Ash is a great example of the guy we all hope shows up at our home. He is professional, explains issues clearly, friendly and immaculate....nice guy.
Response from Chud Air Conditioning & Heating:
Lenny, thank you for the 5 star review, we are grateful that you chose Chud.
Thorough repairs
Jeffrey - Elkins Park, PA 19027
My technician explained all the repairs needed, contacted the manufacturer of the defective part and cleaned the mold from the are area caused by the problem.
Response from Chud Air Conditioning & Heating:
Jeffrey & Sharee, thank you for the 5 star review, we are grateful that you chose Chud.
Excellent service
Elissa - Elkins Park, PA 19027
Paul was excellent - every service person from Chud always is.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Elissa, everyone at Chud appreciates it!
Great service
Marilyn - Elkins Park, PA 19027
After several visits from Chudd where I thought the problem was solved, I finally believe it is.
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Yale & Marilyn.
Great service
Yan - Elkins Park, PA 19027
Response from Chud Air Conditioning & Heating:
5 stars, thank you Yan & Susan!
Great
Jeanne - Elkins Park, PA 19027
Worked hard
Response from Chud Air Conditioning & Heating:
Jeanne, thank you for leaving Chud a 5 star review!
Duct work
Marilyn - Elkins Park, PA 19027
Great work
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Marilyn.
Great
Jeanne - Elkins Park, PA 19027
on time, helpful, friendly , knowledgeable
Response from Chud Air Conditioning & Heating:
Jeanee, thank you for leaving Chud a 5 star review!
Great service!
Karen - Elkins Park, PA 19027
Response from Chud Air Conditioning & Heating:
Karen, thank you for the 5 star review.
Great Service
Sheila - Elkins Park, PA 19027
Response from Chud Air Conditioning & Heating:
We always strive for 5, please give us a call at 215-659-4343 to let us know what we could have done to get that 5th star.
Great service
Paul - Elkins Park, PA 19027
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Paul.
Great service
Elaine - Elkins Park, PA 19027
It was easy to schedule an appointment, they came right on time. Keith was very nice and informative. It all went smoothly.
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Elaine.
annual vent cleaning.
Leon - Elkins Park, PA 19027
Representatives came at the correct time and did an excellent job.
Response from Chud Air Conditioning & Heating:
Leon thank you for the 5 star review, we are grateful that you chose Chud.
Homeowner
Paulette - Elkins Park, PA 19027
The initial visit and follow ups were productive and professionally handled.
Response from Chud Air Conditioning & Heating:
Hi Paulette! What would make you give us that 5th star? Please give us a call to discuss, 215-659-4343.
Great service
Claire - Elkins Park, PA 19027
Response from Chud Air Conditioning & Heating:
Edward & Claire, thank you for the 5 star review, we are grateful that you chose Chud.
Mr.
George - Elkins Park, PA 19027
Quick, efficient, courteous and had helpful advise.
Response from Chud Air Conditioning & Heating:
George, thank you for the 5 star review, we are grateful that you chose Chud.
Great service
Marilyn - Elkins Park, PA 19027
Excellent
Response from Chud Air Conditioning & Heating:
5 stars, thank you Yale!
Great service
Edward - Elkins Park, PA 19027
Resolved my problem
Response from Chud Air Conditioning & Heating:
Edward & Claire, so glad we could help!
Paul T.
Performed preventative maintenance on a Utica boiler system model #Mgb-75j serial #171400347 . Upon arrival the home was calling for heat so I took a combustion analysis test and received the following readings, o2 is at 12.6% and the co levels are 10ppm. I observed the system heat until it reached the temperature limit of 180°F. I then powered the system down and removed the access panel. Removed and cleaned out the burners and burner box. Cleaned carbon off of the pilot assembly. Checked all electrical connections to ensure that they are secure and in good condition. The limit is set for 180° and the water pressure is at 20 psi. I checked all copper’s fittings to ensure that there are no leaks or corrosion. The circulator pump and expansion tank are both in good condition. I powered the system back up and checked for proper operation. The system is operating properly at this time.
Christian C.
Came out today to replace 50 gal chimney vent water heater. Upon arrival we drained system, disconnected gas piping and removed old heater. We adapted to all existing gas pipe, copper water piping, and flue piping. We replaced expansion tank as well. We put in place the new water heater, used pro press fittings for copper pipe adaptation. Filled the system back up. We lit the pilot. System is operating properly at this time. Model # RG250T6N Serial # YJ50353085 **Office is handling payment, per PA**
Christian C.
Performed preventative maintenance on a Goodman furnace. Upon arrival I watched system cycle on with a call for heat. I took a combustion analysis test and got the following: O2 is 5.6% and the CO is 20ppm. I checked and cleaned flame sensor of any carbon build up. Made sure the burner compartment was clean of any debris. Checked all electrical components to ensure the connections were tight. I checked all vinyl tubing to ensure no clogs or leaks. Checked condensate draining was clear of any clogs. Took amp readings on inducer motor and blower motor, both are in good range. Watched system cycle off when temperature was reached. Returned thermostat to homeowners desired temperature. System is working properly at this time. Model # GMES920603BNAA Serial # 2111018866 **Should call homeowner to schedule heater maintenance in October. Keep an eye for condensation in burner compartment**
Christian C.
Came to assess no hot water call. Upon inspection I found that the igniter in the hot water heater was not sparking. After numerous attempts to get the igniter to spark, I used a lighter to get the pilot to light. Pilot is lit and running at this moment. ***Office will contact homeowner with pricing for igniter*** Model # MI5036FBN Serial # MC35834632
Keith R.
Performed a first floor dryer vent cleaning. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Shane A.
Customer said his fan was stuck on high speed when I arrived the unit was very loud. Shut the unit off put a new filter in and changed the fan speed on the thermostat to low, and the blower motor ramped down. Unit is operating properly at this point. M#FHSS108A S#AUBU140200404
Paul T.
Performed preventative maintenance for a Lennox furnace model #SL280DF090V60C-04, serial #5915J04513. The system is located on the second floor in a closet. Upon arrival the system was calling for heat. It was so hot in the closet that I had to shut the system down and let the room cool before I took a combustion analysis test. I powered the system down and removed the access panels. I removed and cleaned carbon off of the flame sensor and cleaned out the burners and burner box. I replaced the air filter size 20x25x1. The homeowner has been using the filtrete 3m filters. The cardboard on these filters are to thick and will not fit. I installed a chud supplied filter and it fit with no issues. I advised the homeowner on which filters would fit in her system and where to get them. Checked all electrical connections to ensure that they are secure and in good condition. Checked the pressure switch for clogs. The blower motor and blower wheel are extremely dirty. Highly recommend removing a
Paul T.
Came out today to perform preventative maintenance for a York furnace model #P2mpd12n06401g, serial #Edem134467. Upon arrival the thermostat was set for heat so I raised the temperature about 10°. I observed the system starting normally and took a combustion analysis test. I received the following readings o2 is at 11.8% and the co levels are 6ppm. The inducer motor amp draw is 1.05 and the blower motor amp draw is 4.6. I powered the system down and removed and cleaned carbon off of the flame sensor. I cleaned out the burners and burner box. Checked the pressure switch for clogs and replaced the air filter size 16x15x1. I checked all electrical connections to ensure that they are secure and in good condition. The blower motor and blower wheel are clean and in fair condition. The system is currently operating properly however the system is 27 years old. Chud cannot Guarantee that there won’t be issues with the system in the future due to the age of the system. I highly recommended updat
Christian C.
Arrived on site to assess water leak call. Upon arrival I found that the condensate pump was not working properly. Upon further inspection I found that the float in the condensate pump was was not functional. I manually water tested multiple times confirm diagnosis. I replaced condensate pump, wired in safety switch and manually water tested a few more times to ensure proper operation. System is working properly at this time.
Keith R.
Performed a 2nd floor dryer vent cleaning. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Keith R.
Attempted to perform a first floor / rooftop dryer vent cleaning. Dryer 4 inch pipe is clogged through the wall to the roof. unable to remove clog due to high volume of wet solidified lint and disintegration of the pipe. Recommend having a licensed handyman look at replacing the pipe. Will have to charge the rice of the dryer vent cleaning for billable time spent.
Keith R.
Performed a first floor dryer vent cleaning and secured some of the 4 inch piping with the proper tape. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Shane A.
Did a maintenance on a gas furnace. Arriving to the job system was not working. Had a dirty flame sensor I cleaned it and the unit started right up. Customer changed out the 16x25x1 filter. Did a combustion test the ppm was 31. Did a amp check on the blower motor and inducer motor. Made sure all electrical connections are tight and secure. M#TUD100R9V5K5 s#10214MTG7G was not able to replace flame sensor because I did not have one that fit this particular system.
Paul T.
Came out today to perform diagnostics for a system that lost heat on 12/24/22. Crown boiler model #ABF-105spd, serial #crownss000238282. Upon arrival the system was shut down. I removed the access panel and light the pilot. The pilot refused to stay light. I removed the assembly and noticed that the thermocouple was severely damaged. I replaced the thermocouple and tested the system. The system started up without any issues. I let the system run for about 15 minutes. The system is operating properly at this time. The system is 22 years old and chud cannot Guarantee that there won’t be issues in the future. Recommend updating the system. Collecting for thermocouple only. Diagnostics was paid for on 12/24/22.
Keith R.
Performed a 2 bedroom air duct cleaning. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Thank you for your business! Unable to perform dryer vent cleaning as the pipe is with clogged or the flex hose is pinched in the attic. Upstairs neighbor is not home so we will need to reschedule when we have access to the upstairs apt.
Paul T.
Performed preventative maintenance for a Weil-McLain boiler system model #CGM 7 PI, CP #666115. Upon arrival the thermostat was calling for heat and the system was at the desired temperature. I turned the system up about 10° and removed the access panel. I observed the system starting normally and took a combustion analysis test. I received the following readings, o2 is 9.8% and the co levels are 21ppm. The water pressure is at 17psi and the limit is set for 180°F. The circulator pump is operating properly properly. I inspected all electrical connections to ensure that they are secure and in good condition. Inspected all copper piping to insure that there is no leaks or corrosion. One small section looks like it was leaking at one point then was repaired. Checked both zones to ensure that they are operating properly. I powered the system down and removed and cleaned the burners. Cleaned out the burner box. I powered it back up to check for proper operation. The system is operating prop
Frank B.
Returned to inspect new aquastat that was installed by us yesterday. Aquastat did not appear to be acting up on arrival, but per the customer he told me that it was making a vibration noise, wasn’t working properly and it was hot. The vibration noise was due to the longer wire harness for the electronic damper, cleaned up the wires the best I could to keep them away from contact devices to prevent vibration. The contact device was said to be getting hot. This is normal operation for this electronic component and not abnormal. Tested the system after I made sure all wires were properly secure to the aquastat found no noise or system failure during testing no charge for return visit due to recent repair. Manufacturer Crown Model #AWI162SNST1PSU Serial #CROWNB000401895
Christian C.
Performed preventative maintenance on a Lennox furnace. Upon arrival I watched system cycle on with a call for heat. I checked all electrical components to ensure the connections are good. I took a combustion analysis test and the O2 and the CO were both in normal ranges. I took amp readings on inducer and blower motor and both are in good range. I checked vinyl tubing for any clogs or leaks. Homeowner replaced filter recently, sized 16x25x1. Checked and cleaned flame sensor for any carbon. I checked condition and operation of condensate pump, I found no obvious indicators of potential leaks. I watched the system cycle off when temperature was reached. Returned thermostat set point back to the homeowners desired temperature. System is working properly at this time. Model # G61mp-60C-091-09 Serial # 5910J43272
Christian C.
Performed preventative maintenance on a Lennox furnace. Upon arrival watched system cycle on with a call for heat. I took a combustion analysis test and got the following results: O2 is 10.3% and the CO is 7 ppm. I checked all electrical components to ensure the connections are good. I took amp readings on inducer and blower motor and both are in good range. Checked vinyl tubing for any clogs or leaks. Changed filter sized 14x25x1. Checked pressure switches for proper operation. I watched system cycle off when temperature was reached. I returned thermostat set point back to homeowners desired temperature. System is working properly at this time. Model # EL296UH090XV60C-07 Serial # 5919B24844
Frank B.
Replaced Aquastat on a crown boiler system that was shorting out. Installed new aquastat and tested the system. System ran without fail after Turing the system off and on multiple times. Boiler system is operating properly at this time. Recommend preventative maintenance due to no record of maintenance recently. Model #AWI162SNST1PSU, serial #CROWNB000401895
Christian C.
Performed preventative maintenance on a York furnace. Upon arrival I watched system cycle on with a call for heat. I took a combustion analysis test and got the following results: O2 is 13.4% and CO is 8 ppm. I checked and cleaned flame sensor of carbon. Checked and cleaned burner compartment. Took amp readings on inducer and blower motors and both are in good range. Changed filter, filter size is not standard size 13x21x1. Used filter from truck stock that was closest 14x25x1. Did visual inspection on furnace for any dirt, rust, or moisture, none were found. Checked all electrical components to ensure connections are good. I watched system cycle off when temperature was reached. I returned thermostat set point back to homeowners desired temperature. System is working properly at this time. Model # TG8S060A10MP11A Serial # W1B3479470
Paul T.
Came out tonight for a no heat call on a crown boiler system model #AWI162SNST1PSU, serial #CROWNB000401895. Upon inspection I found that the pilot was lit and the circulator pump was circulating water but the burners would not ignite. I opened the Aquastat and as soon as I did the system started. The homeowner stated that frank had this same issue in the past. I began to check the connections in the Aquastat and I found a loose molex plug. As I lightly touched the connection I could hear the system start and stop. I was able to get the system to operate for the time being however I highly recommended replacing the Aquastat. Once the system was fired up the relief valve began to open. This was due to the homeowner adding water to the system. I relieved some of the pressure and got it to 20 psi.
Paul T.
Installed a new 60 amp non fused side open disconnect with internal surge protector on a Mitsubishi mini split model #SUZ-KAO9NA, serial #7YP01185. I powered the system down and removed the existing disconnect. I installed the new disconnect and powered the system back up to check for proper operation. The system started and ran without any issues. I powered the system back down and performed heat pump coil cleaning. I cleaned the coils using the proper chemical solution. I let it sit for about 5 minutes then I rinsed the coils. I powered the system back up and checked for proper operation. The system is operating properly at this time. The estimate for today’s service was created on 11/30/22. At that time the homeowner pre paid 50% of today’s service. Collecting the remaining balance. Price reflected below.
Christian C.
Performed preventative maintenance on a Lennox high efficiency furnace. Upon arrival I performed a combustion analysis test and the O2 is 8.7% and the CO is 5ppm. I checked and cleaned the flame sensor and burner box. Filter is an Alvi electronic air filter sized 16x25x1. Checked pressure switches for proper operation. Checked all electrical components to ensure good connections. Took amp draws on inducer fan and blower fan. Both are in good range. Checked vinyl tubing for clogs watched unit cycle on and off when it’s gets call for heat and satisfies. System is operating properly at this time. Model # G61MP-60D-135-06 Serial # 5905M34375
Matthew M.
Completed full Goodman system installation. High efficiency furnace, evaporator coil, and condenser. Added Reme halo uv light, and April aire 700m humidifier. Adapted system to existing electrical, gas line, ductwork, lineset (flushed) and venting. Kept thermostat per customer request. Outside replaced disconnect box, whip, and pad. Replaced pressure relief valve on customers boiler due to leak. Cycled and tested, system working properly at this time.