We're the AC experts. But don't take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Jenkintown, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Jenkintown, PA
Our Reviews by City
Quick Response, GREAT Service
Nelson - Jenkintown, PA 19046
Paul is an excellent technician alway pleasant and knowledgeable. He make sure everything is working before leaving. Thanks!
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Nelson, everyone at Chud appreciates it!
Scheduled appt fast
Patricia - Jenkintown, PA 19046
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Patricia. It truly means a lot to the Chud team!
Great service and explained everything in detail.
Robert - Jenkintown, PA 19046
They completely the project with good skills and care.
Excellent
Henry - Jenkintown, PA 19046
Excellent
Frank was terrific. Didn’t quit until the problem was fixed. We are so thankful. We couldn’t live in house with the terrible noise. Only a top notch t
Nick - Jenkintown, PA 19046
Response from Chud Air Conditioning & Heating:
Hi Nick & Maryanne, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great
Nick - Jenkintown, PA 19046
Always a knowledgeable gentleman
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Nick.
Great service
Robert - Jenkintown, PA 19046
Paul is a an excellent technician. He is very knowledgeable and explains everything in detail.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Robert, everyone at Chud appreciates it!
Heater Service
Nelson - Jenkintown, PA 19046
Once again Paul was excellent, he returned the next day with the replacement part and installed it. He made sure all area were working correctly before living. Highly profesional and friendly🙏🏿💙
Response from Chud Air Conditioning & Heating:
Nelson, we’ll make sure to pass your kind words along to Paul, who we know will be delighted to read your comments.
Great service
Allison - Jenkintown, PA 19046
Paul was on-time, knowledgeable, and explained everything so that I could understand his work. Highly recommend!
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Allison. It truly means a lot to the Chud team!
Performance
Nelson - Jenkintown, PA 19046
Once again, I needed CHUD now and here they came. No heat, no problem. Paul diagnosed the problem ordered the part and temporary fixed it so we didn’t freeze. Thankfully we have company like this that still have honor and values. I used CHUD 3 time now and continued to be impressed by their superior knowledge and performance 🙏🏿🦅
Response from Chud Air Conditioning & Heating:
Hi Nelson, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Always excellent service and dependable.
Anthony - Jenkintown, PA 19046
I have been with Chudd for 15 years and their service continues to be the best.
Response from Chud Air Conditioning & Heating:
Anthony, thank you for the 5 star review, we are grateful you continue to choose Chud.
Great Service
Jason - Jenkintown, PA 19046
Response from Chud Air Conditioning & Heating:
Jason, thank you for leaving Chud a 5 star review!
Great service very personable
Patricia - Jenkintown, PA 19046
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Patricia. It truly means a lot to the Chud team!
Keith was friendly and efficient.
Linda - Jenkintown, PA 19046
Very good service, tech’s knowledgeable and professional.
Response from Chud Air Conditioning & Heating:
Linda, thank you for the 5 star review, we are grateful that you chose Chud.
Great service. Knowledgeable
Carmelita - Jenkintown, PA 19046
Professional, efficient and came early in the window of time given to me for service
Response from Chud Air Conditioning & Heating:
Carmelita, thank you for the 5 star review, we are grateful that you chose Chud!
Great service
Eniko - Jenkintown, PA 19046
Excellent
Response from Chud Air Conditioning & Heating:
5 stars, thank you Eniko! Tha Chud team appreciates it.
The best
Albert - Jenkintown, PA 19046
Great
Response from Chud Air Conditioning & Heating:
5 stars, thank you Albert & Christine!
Great service, easy and quick!
Pat - Jenkintown, PA 19046
Frank was on time, diagnosed the problem quickly and remedied the problem! Thank you for responding so quickly to our air conditioning needs.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Pat, everyone at Chud appreciates it!
AC not working properly
Nelson - Jenkintown, PA 19046
Paul provided an excellent service, checking all possible problem area not living out anything. He didn’t try to sell me anything. I strongly recommend Paul as the tech and Chad is the one to go for when in need.
Response from Chud Air Conditioning & Heating:
Thank you for the wonderful review and for taking the time to share your feedback.
A caring knowledgeable professional
John - Jenkintown, PA 19046
I was kept informed throughout the job. The job was performed with detailed, caring, experienced skill. It was also performed in an amiable, extremely efficient manner. These were professionals who I would take an advantage have back into my home to perform any related task.
Response from Chud Air Conditioning & Heating:
Hi John, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
👍🏻👍🏻
Dr Barry Levin - Jenkintown, PA 19046
Highly impressed with CHUD after dealing with another subpar HVAC contractor that we were in contact with. Diagnosis, solution & pricing was received in less than a week. We are looking forward to having our new system installed soon.
Response from Chud Air Conditioning & Heating:
Hi Dr. Levin, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Efficient and quick service!
Pat - Jenkintown, PA 19046
So happy to get immediate appointment for AC service. Paul was efficient and pleasant. Explained our problem. Thank you Paul!
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Pat, everyone at Chud appreciates it!
On time great service
TV1 - Jenkintown, PA 19046
Response from Chud Air Conditioning & Heating:
Anthony, thank you for leaving Chud a 5 star review!
Quick service
Andrew - Jenkintown, PA 19046
Response from Chud Air Conditioning & Heating:
5 stars, thank you Andrew!
Emergency call
John - Jenkintown, PA 19046
Technician was very nice and professional but could not find the source of the problem. Still, above average for his positive approach and attitude.
Response from Chud Air Conditioning & Heating:
5 stars, thank you John & Darcie!
Matthew M.
Installed air handler and heat pump. Added new wireless thermostat. Converted outdoor condenser to a heat pump. Added new electric disconnect box and high voltage AC whip from disconnect box to heat pump. Added 10 kw heat pack to air handler, new over flow pan with safety switch and new drain trap for condensate. Flushed line set with R 11 acid flush. Flushed drain line and water tested from evaporator coil. The air handler and condenser were both tied into the same circuit breaker and wire coming from the panel to the air handler is under sized. Electrician was out to quote running a larger wire from panel to air handler in attic and have it on its own dedicated breaker. Electrician will also be running an 18/8 low voltage communication wire from air handler to outdoor heat pump. Electrician will let us know when job is complete so we can finish the electrical and do a proper start up. Filter size 12x20x1 We will collect balance once job is finished.
Paul T.
Came out today to survey a home to install two humidifiers. Upon arrival I met with Charles and he explained what he is looking for. The homeowner has a boiler system for the main house and a high efficiency Payne furnace in a crawl space under the addition. The homeowner stated that his bedroom gets very dry and he currently has a stand alone humidifier in the room. I explained to the homeowner how a steam humidifier would be set up in his bedroom. The homeowner dismissed the steam humidifier. Upon looking at the set up of the Payne furnace I found that the system was installed poorly. The fresh air intake is pulling air from the crawl space and not outside. The circulator discharge tube is approximately 50-75 feet long, runs through an unconditioned crawl space then drains outside. Due to the unconditioned crawl space and the system draining outside there is potential for freezing. It is not recommended to install a humidifier with the system draining the way it is currently draining
Keith R.
Performed air duct cleaning and sanitation on a 3 bedroom single system house. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Thank you for your business!
Christian C.
Performed preventative maintenance on a Weil McLain high efficiency boiler. Upon arrival I watched system cycle on with a call for heat. I took a combustion analysis test and got the following: O2 was 3.5% and O2 was 14ppm. I checked water pressure and temperature on gauge which read 10 psi and 160°F. Limit is set for 180°F. Checked and cleaned condensate trap tubing to ensure no clogs or leaks. I checked all electrical components to ensure the connections are good and tight. Took an amp draw on inducer motor and it is in good range. Checked condensate pump for proper operation. I watched system cycle off when temperature was reached. Returned thermostat to homeowners desired temperature. System is working properly at this time. Model # GV90+4 Serial # is covered by outlet.
Paul T.
Came out today to look at a tankless water heater. Upon arrival I found the noritz tankless water heater not operating. The control says it is 140° however the water starts hot then gets cold quickly. There is a combustion issue possibly need a new igniter and flame sensor. The system is currently 12 years old . Could not find a model or serial # all writing is in Chinese. The only thing readable is the manufacture date. The system is out of warranty. With the age and condition of the system I highly recommended replacing the system. I will have chud’s comfort advisor reach out to the owners to discuss possible hot water heater areas.
Paul T.
Performed filter change for 2 systems <br> System #1 Goodman furnace model #GMS80453ANA, serial #0507144389. Replaced a 16x20x1 air filter. System #2 model # GM9S801005CNAA, serial #2112217589. Replaced the air filter size 16x25x1. Service is prepaid for per office.
Paul T.
Replace the squirrel cage on the Gibson/ nordyne system. Model #KG7SA108C-35C1, serial #KGG150444890. Current squirrel cage is bent. <br> <br> Returned today to replace a blower wheel (squirrel cage) on a Gibson furnace model #KG7SA108C-35C1, serial #KGG150444890. Upon arrival I powered the system down and removed the access panels. I removed the blower assembly and disassembled it. I installed the new blower wheel and put the assembly back together. I re installed the blower assembly and powered the system back up. The furnace fired up right away and the blower is no longer making any noises. The system is operating properly at this time.
Paul T.
Came out today to inspect a Goodman furnace that chud installed on 11/28/22. Upon arrival the system was calling for heat. It was set for 82 and it was 64 in the home . I inspected the furnace and had an error code EE6. This is a error code for the flame sensor. I reset the furnace and called for heat again. I observed the system light then go out. The flame sensor was just out of reach. I was able to bend it back into position and tested the system again. The system started without any issues and I observed as the temp in the home went up 5°. The system is operating properly at this time. No charge per dispatch.
Frank B.
Customer called for no heat. Upon inspection I found the flue damper motor failed. Put damper in manual mode for now so that the customer has heat until we can repair it. Boiler is operating at this time but will need new damper motor as well as wire harness. See attached estimate for repair quote. Customer would like to follow through with the repair. Collected for diagnosis of problem today. Office will call when parts are in and ready to be installed.<br> Manufacturer Weil McLain Model #CG 5 SPDN Serial #CP3684246
Paul T.
Came out today for a nordyne system that was making a loud banging and grinding noise. The homeowner recorded the system making the noise. Once the homeowner played the video I could tell by the sound that there is an issue with the blower motor. I powered the system down and removed the access panels. I pulled the blower out and found that the squirrel cage had come loose and was hitting the side of the housing. I was able to readjust the squirrel cage to get the homeowner heat for the time being. The squirrel cage is bent and should be replaced due to it being bent from hitting the side of the housing. Gibson/nordyne model #KG7SA108C-35C1, serial #KGG150444890. No charge call back.
Frank B.
Customer called for no heat. Upon inspection I found now power at the furnace. I started the trace back why there’s no power. Found the condensate pump filled to the top with the pump no longer working. Gave customer a price for a new pump and she agreed for the repair. Installed new pump and tested the system. System is operating properly at this time. Manufacturer Lennox Model #G61MPV-36B-071-12 Serial #5910H19942
Frank B.
Customer stated that the system, for the addition was not working properly. Upon inspection, I found that the filter was very dirty just under 30 days old and the system was going off on high limit switch. This was error code EE3. I then adjusted the blower speed to send more airflow through to keep the temperature within range. also replaced the air filter since the system was just installed last month. Customer had FWI duct cleanings today which could have added to the buildup on the filter since the addition duct work was heavily blocked with dirt. System is operating properly at this time. Manufacturer Goodman Model #GM9C960804CNAB Serial #2209353946
Paul T.
Performed preventative maintenance for a peerless boiler system model #MI-05-STDG-WPC, serial #382501-200112. Upon arrival the system was calling for heat so I took a combustion analysis test and received the following readings, o2 is at 11% and the co levels are 4ppm. The circulator pumps is operating properly and the water pressure is at 18psi. The temp limit is set for 180°F. I inspected all the copper piping for corrosion and leaks. The system is equipped with a auto fill. I observed the system heat , once the burners went out due to temp limit I observed the circulator pump continue to circulate water. The system is operating properly at this time.
Keith R.
Performed air duct cleaning and sanitation on a 4 bedroom 2 system house. All vents and ductwork are clear of dust and debris at this time. Main system is functioning properly at this time. Upon arrival I noticed the second system wasn’t getting heat. Otherwise the system is functioning. Recommend duct cleaning every 3-4 years. Thank you for your business! This was free with install
Christian C.
Performed preventative maintenance on a Lennox furnace. Upon arrival I watched the system cycle on with a call for heat. I checked all electrical components to ensure connections are good. I checked vinyl tubing to ensure there are no clogs. I replaced #35 panel for humidifier. Took amp draws on inducer fan and blower motor and both are in good range. Checked pressure switch for proper operation. Took a combustion analysis test and got the following results: O2 is 6.9% and CO is 22 ppm. Checked filter and upon inspection, I did not see a reason to change filter. Should be changed in the spring. Watched system cycle off when temperature was met. Changed the thermostat set point back to homeowners desired temperature. System is working properly at this time. Model# SLP98UH135XV60D Serial # 5913H38337 Humidifier model # HCWP3-18 Serial # 2215A03044
Christian C.
Performed preventative maintenance on a weil-McLain boiler system. Upon arrival I watched system cycle on with a call for heat and checked all electrical components to ensure connections are good. Cleaned out burner tubes and boiler housing for soot. Watched system cycle off when temperature set point was reached. Homeowner had issue with radiator on third floor. Homeowner bled radiators out but had only air come from last radiator. I filled boiler to proper pressure and bled radiators until water came out. I returned thermostat setpoint back to homeowners desired temperature. System is working properly at this time. Model # CGA8SPDN Serial # 1
Christian C.
Performed preventative maintenance on a Trane furnace. Upon arrival I took a combustion analysis test and received the following readings: O2 is 9.6% and the CO is 2ppm. I took an amp draw on both inducer and blower motor, both are in good range. Homeowner made me aware that they replaced the filter a few days ago. I removed and cleaned flame sensor and cleaned burner area. Checked all electrical components to ensure connections are good. Watched system cycle off when temperature was met. Returned thermostat set point back to customers desired temperature. System is working properly at this time. Model# TUD1D140A9601AA Serial #8473TAU1G
Paul T.
12/13/22-PT- upon arrival I turned off the gas and supply water to the hot water heater. I then began pumping out the hot water heater. Once the system was empty I cut the copper lines and disconnected the gas line. I removed the old hot water heater and installed a new Bradford white 40 gallon natural gas hot water heater. Model #rg240t6n, serial #yl50528555. I connected all the copper using pro press fittings. The cold line is 3/4 copper and the hot side is 1/2 inch copper. I installed ball valves on the hot and cold line so the system can be isolated if needed. I replaced the old shut off for the gas line and installed a new one. I opened the supply for the water and gas and checked for leaks. I fired the system up and bleed out the hot water line. The system is operating properly at this time. Replaced a inducer motor, pressure switch and collector box for a Lennox furnace model #SLP98UH090XV48C-05, serial #5913K01355. I powered the system down and removed the access panels. I r
Keith R.
Returned to Perform an air duct cleaning and sanitation on the downstairs system of a 3 bedroom 2 system house. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Construction is still ongoing. Recommend not running the system while work is being performed. Thank you for your business!
Shane A.
Did maintenance on two gas furnaces. M#GMEC800603BN s#2010008905 during the maintenance did a combustion test, ppm 17 o2 was 9 changed 16x20x1 filter checked all electrical connections. And cleaned the flame sensor. M#GMEC800804BN s#1908658155 did a combustion test ppm was 22 and o2 was 11. Cleaned flame sensor and changed 16x25x1 filter. Did a amp check on blower motor and inducer motor which both met the furnace specs. Both systems are operating properly at this time.
Christian C.
Performed preventative maintenance on a tempstar furnace. Upon arrival I took a combustion analysis test and the O2 is 8.2% and the CO is 1 ppm. I checked all electrical components to ensure the connections are good. I checked and cleaned burner compartment. I checked amp draws on inducer fan and blower motor both are in good range. I watched unit cycle on with a call for heat and I watched system cycle of when temperature was met. Checked pressure switch for proper operation. Changed air filter sized 16x25x1. Returned thermostat set point to homeowners desired temperature. System is working properly at this time. Model # NTC6125KJA2 Serial # L011067833
Matthew M.
This location has access to 3 split systems. I was only able to gain access to 1 indoor unit and 3 outdoor units. I was unable to gain access to the rooftop to verify if the unit conditions this location. Customer has 3 thermostats. The filter size for the one unit is 20x22x1. The returns for the air handlers appear to be pulling from above the drop ceiling. I will enter gathered information and pictures. Will need to return at a time when we can get access to rooftop and additional air handlers. Please verify access before sending out technician. BILLOUT
Shane A.
Did a maintenance on a gas boiler. Did a combustion test the ppm was 37 and o2 was 12. Did a amp check on both circulators and both are running properly. Put oil in the circulators as well. Cleaned out all of the burners wipe down the spark ignition. Boiler water pressure is at 24. All returns are coming back hot which tells me their is no air in the system. System is operating properly at this time. M# AWI295ENST1PSU s#CROWNB000375277
Paul A.
Preventative maintenance inspection on (2) Trane rooftop package heat pump units. Replaced (4)-18x18x1 air filters. Customer reported that he tested the heat a few weeks ago. They are running air conditioning today due to the nature of the business. Business is a dog grooming facility and the building gets humid and hot due to the multiple wash stations and hot water usage. Indoor filters are replaced by the business owner every 2 weeks. Units are in fair condition due to the type of environment they are in. Advised the business owner, Matt of today’s service as he was not on site today. N/C, has commercial agreement. Trane RTU M#4WCC4060A1000AA, S#181913356L-(2) 18x18x1 Trane RTU M#4WCC4060A1000AA, S#181413501L-(2) 18x18x1 Goodman M#GSZ140301KG, S#2106467909-(2) 20x20x1 (Owner Changes).
Shane A.
Did a preventative maintenance on a gas furnace. Cleaned the flame sensor. Checked the HSI. Did a combustion test the ppm was 30 and o2 was 10. Did a amp draw on inducer motor and blower motor witch both met the furnace specs. Changed out 16x25x1 filter. All electrical connections are tight and secure. System is running properly at this point. M#58cva090-16 s#3210a15846